-
Dolly Drill for Adhesion Test
The Dolly Drill is the perfect tool to remove the excess of glue and cut through the coating around dollies in order to prepare the dolly for the adhesion test. Fixed positioning is assured with the three strong magnets, allowing the drill to remove the coating around the dolly without putting any force on the dolly. Manually removing the access of glue and cutting through the coating is a hard... -
Adhesion Tester Manual AT
The new PosiTest AT Manual Adhesion Tester measures adhesion of coatings applied on metal, wood, concrete and similar substrates.The system is equipped with an electronically controlled hydraulic pump and measures according to ISO4624 and ASTM D 4541.The unit is equipped with a self aligning quick coupling which secures the dollies tight.Tests are performed by a simple press on the button.... -
PAT Pull Adhesion Tester Model GM01 & GM04
This Precision Pull Off Adhesion Tester is a hydraulic tensile tester that works on the so-called pull off principle, and complies with the requirements of ISO 4624. The system consists of a hydraulic hand-pump equipped with a precision manometer and the actual adhesion pull off testing head.The coating testing-head is equipped with four cilinders that work according to the 'Dynamic Force... -
Adhesion Tester XS1000
The Adhesion Tester is one of the most accurate and versatile adhesion testers currently available. It measures the adhesion bond strength of applied coatings with ease and precision. According to: - ISO 4624: Paint and varnishes: Pull off test for adhesion. - ISO 16276- 1: Corrosion Protection of steel structures by protectivepaint systems. Assessment of, and acceptance criteria for... -
AT-A Automatic Adhesion Tester
The new PosiTest AT-A Automatic Adhesion Tester measures adhesion of coatings applied on metal, wood, concrete and similar substrates. The system is equipped with an electronically controlled hydraulic pump and measures according to ISO4624 and ASTM D 4541.The unit is equipped with a self aligning quick coupling which secures the dollies tight. Tests are performed by a simple press on the... -
Cross Cut Adhesion Test Basic Cutter CC2000
The Cross Cut Adhesion Test Basic Cutter is used to test the adhesion of dry coats of paint on their substrate by means of a series of cuts through the coating. Two series of parallel cuts cross angled to each other to obtain a pattern of 25 or 100 similar squares. The ruled area is evaluated by using a table chart after a short treatment with a stiff brush, or adhesive tape for hard... -
Cross Cut Adhesion Test KIT CC1000
The Cross Cut Adhesion Test KIT CC1000 is used to test the adhesion of dry coats of paint on their substrate by means of a series of cuts through the coating. Two series of parallel cuts cross angled to each other to obtain a pattern of 25 or 100 similar squares. The ruled area is evaluated by using a table chart after a short treatment with a stiff brush, or adhesive tape for hard... -
Cross Cut Adhesion Test KIT CC2000
The Cross Cut Adhesion Test KIT CC2000 is used to test the adhesion of dry coats of paint on their substrate by means of a series of cuts through the coating. Two series of parallel cuts cross angled to each other to obtain a pattern of 25 or 100 similar squares. The ruled area is evaluated by using a table chart after a short treatment with a stiff brush, or adhesive tape for hard... -
Cross Cut Adhesion Test KIT CC3000
The Cross Cut Adhesion Test KIT CC3000 is used to test the adhesion of dry coats of paint on their substrate by means of a series of cuts through the coating. Two series of parallel cuts cross angled to each other to obtain a pattern of 25 or 100 similar squares. The ruled area is evaluated by using a table chart after a short treatment with a stiff brush, or adhesive tape for hard... -
Adhesion Kit Master Paint Plate
The Cross Cut Adhesion Test KIT (Master Paint Plate) is a stainless steel measuring tool that features: a 1 mm, 1.5 mm, 2 mm and 3 mm cross cut adhesion test according NEN-EN-ISO 2409:2003 and ASTM D 3359 (X-cut) andreas cross, wet film thickness gauge from 50 up to 160 microns, edge grind checker for correct roundness of edges, wet film applicator ranging from 0 to 180 µm as well as... -
Adhesion test kit HPK
The Adhesion Test Kit (HPK) is a method developped in the Netherlands by FOSAG and SKH to determine the adhesion of new and old paint layers on wood and woodlike materials. The damage on the substrate will be reduced to a minimum. The adhesion is judged by comparing the removed paint on the tape, and the remaining paint on the wood with the illustrations classifying the damage from class 0 to... -
Tape For Adhesion Test (ISO 2409:2003)
The Tape For Adhesion Test (ISO 2409:2003) is used to perform a cross cut hatch adhesion test according to ISO 2409:2003 standard. To be used with Cross Cut Adhesion Test Kit CC1000, Cross Cut Adhesion Test Kit, Basic Inspektion Kit, Master Paint Plate, Adhesion Test Kit and SuperPIG, etc. Models available: Tape for Cross Cut Adhesion Test, 1 roll acc. EN ISO 2409:2003. Tape for...
Follow us