-
Cross Cut Adhesion Test Basic Cutter CC2000
The Cross Cut Adhesion Test Basic Cutter is used to test the adhesion of dry coats of paint on their substrate by means of a series of cuts through the coating. Two series of parallel cuts cross angled to each other to obtain a pattern of 25 or 100 similar squares. The ruled area is evaluated by using a table chart after a short treatment with a stiff brush, or adhesive tape for hard... -
Cross Cut Adhesion Test KIT CC1000
The Cross Cut Adhesion Test KIT CC1000 is used to test the adhesion of dry coats of paint on their substrate by means of a series of cuts through the coating. Two series of parallel cuts cross angled to each other to obtain a pattern of 25 or 100 similar squares. The ruled area is evaluated by using a table chart after a short treatment with a stiff brush, or adhesive tape for hard... -
Cross Cut Adhesion Test KIT CC2000
The Cross Cut Adhesion Test KIT CC2000 is used to test the adhesion of dry coats of paint on their substrate by means of a series of cuts through the coating. Two series of parallel cuts cross angled to each other to obtain a pattern of 25 or 100 similar squares. The ruled area is evaluated by using a table chart after a short treatment with a stiff brush, or adhesive tape for hard... -
Cross Cut Adhesion Test KIT CC3000
The Cross Cut Adhesion Test KIT CC3000 is used to test the adhesion of dry coats of paint on their substrate by means of a series of cuts through the coating. Two series of parallel cuts cross angled to each other to obtain a pattern of 25 or 100 similar squares. The ruled area is evaluated by using a table chart after a short treatment with a stiff brush, or adhesive tape for hard... -
Adhesion Kit Master Paint Plate
The Cross Cut Adhesion Test KIT (Master Paint Plate) is a stainless steel measuring tool that features: a 1 mm, 1.5 mm, 2 mm and 3 mm cross cut adhesion test according NEN-EN-ISO 2409:2003 and ASTM D 3359 (X-cut) andreas cross, wet film thickness gauge from 50 up to 160 microns, edge grind checker for correct roundness of edges, wet film applicator ranging from 0 to 180 µm as well as... -
Adhesion test kit HPK
The Adhesion Test Kit (HPK) is a method developped in the Netherlands by FOSAG and SKH to determine the adhesion of new and old paint layers on wood and woodlike materials. The damage on the substrate will be reduced to a minimum. The adhesion is judged by comparing the removed paint on the tape, and the remaining paint on the wood with the illustrations classifying the damage from class 0 to... -
Tape For Adhesion Test (ISO 2409:2003)
The Tape For Adhesion Test (ISO 2409:2003) is used to perform a cross cut hatch adhesion test according to ISO 2409:2003 standard. To be used with Cross Cut Adhesion Test Kit CC1000, Cross Cut Adhesion Test Kit, Basic Inspektion Kit, Master Paint Plate, Adhesion Test Kit and SuperPIG, etc. Models available: Tape for Cross Cut Adhesion Test, 1 roll acc. EN ISO 2409:2003. Tape for...
Follow us