-
NIST Calibration Standards
These traceable chrome plated steel test blocks are used to verify the accuracy of magnetic dry film thickness gages. Each set comes complete with a zero plate and multiple test blocks housed in a small vinyl binder and a Certificate of Traceability. Accuracy is +/- 5%; test blocks conform to ASTM D7091 and SSPC-PA2. Made in the USA. Models availables: Model SRM/1358 - 0.00-39... -
Coating thickness calibration standards 411
Plastic foils and plates. Certificates available upon request. Available in the range from 12 to 20.000 micron. These foils can be applied to all ferrous- or non-ferrous metal substrates. Models available: Coating thickness calibration standard, set of 5 Plastic Shims, Non-Certified: 25 µm (1 mil) Orange ± 20%, 50 µm (2 mil) Red ± 10%, 125 µm (5 mil) Blue... -
Coating Thickness Calibration Standard
Coated metal calibration standards consisting of a set of 4 calibration plates with epoxy coating on steel or aluminium. Model available: Coating Thickness Calibration Standard S1 FE, 0/75/250/1500 µm. Coating Thickness Calibration Standard S2 FE, 0/75/250/1000 µm. Coating Thickness Calibration Standard S3 FE, 0/15/ 40/ 100 µm. Coating Thickness Calibration... -
Ferrous zero test plate
Zero Test plates are for use in the laboratory, on the production line or on site.When used in conjunction with a set of foils, these test plates are ideal to test a coating thickness gauge’s functionality and calibration.In some cases, it may be difficult or impractical to obtain an uncoated substrate. For this reason Optimiza provides a range of Zero Test Plates. Packing...
Follow us