-
Hardness tester 2000 DL
Hardness tester 2000DL (type DL impact) portable hardness tester is used to quickly test the surface hardness of metalic materials according to the parameters: Rockwell B & C, Vickers HV, Brinell HB, Shore HS and Leeb HL. The hardness tester can be used in any position, including on a mount, with angle selection and adjustment. The striking unit fits easily on top... -
Barcol Hardness Tester
Simple, portable instrument for testing the hardness of materials acc. to ASTM D2583. When pressure is applied to the device, a point penetrates the material and the degree of hardness is displayed on a dial, which is graduated from 0 to 100. Technical Specifications: For metals, hard plastics etc. With conversion table into Brinell, Vickers & Rockwell B, E, F, H Packing... -
Hardness Testet Buchholz
The Buchholz Hardness Indentation Test provides a method for carrying out an indentation test on coatings complying with the ISO 2815-2003 standard. The Buchholz Hardness Indentation Test consists of a calibrated slip-on weight with a sharp-edged metal wheel, an illuminated microscope, a level gauge, a digital dual timer, and two markers with template. The calibrated slip-on weight... -
DD Hardness tester
The DD A digital durometer is an ergonomic device for checking Shore hardness in gum, plastic and other non-metallic materials. It is of highest quality. The DD A digital durometer is mainly used for soft gums, elastomers, natural rubber, neoprenes, casting resin, white PVC, leather, etc. If the material thickness is not enough, it should be tightened on the back with the same material in order... -
Pencil Hardness Test 3423
The Pencil Hardness Test according Wolff Wilborn provides in a simple method to test the scratch hardness of coatings. In this test, pencils in a range of 6B to 8H hardness-grade are used. The pencil is moved scratching over the surface under a 45° angle with a constant pressure. Then an optical assessment is carried out to see which pencil hardness damages the surface. Delivered with... -
Analogic Hardness Tester Shore
The Analogic Shore hardness tester is a standard model for measuring the rubber hardness (Shore D). The device consists of a measurement unit with sensor and 360° anti-glare dial with an accuracy of 0.5 hardness units. It meets DIN 53505, ISO 868, ISO 7619 and ASTM D 2240 standards. The hardness tester comes calibrated and ISO certified. Features: Models with or without... -
Hardness Tester Shore precision analogic DL
The Shore Hardness Tester thin probe with small foot Ø 8 mm is used to measure inaccessible places or uneven surfaces. Shore Hardness Tester was developed to measure the hardness of rubber, plastics , rubber materials, textiles, printing rollers , etc. . All models are factory calibrated ( according to ASTM D 2240 / surface support Ø 8 mm )... -
DDD 10 durometer
The DDD 10 durometer is an ergonomic device to check Shore hardness in gum, plastic and other non-metallic materials. It has been designed with a high quality. If the material thickness is not enough, it should be tightened on the back with the same material in order to increase its thickness. Features: Handheld device- Digital display- Plastic case included- For Shore D measurements-... -
Hardness Tester Vickers 1000
Hardness tester Vickers 1000 is ideal for testing the surface hardness of metallic surfaces quickly. In metallurgy, its very important to know the hardness of the materials being used and this device allows for the materials to be tested in the factory. The hardness tester brings together the parameters of Rockwell B & C, Vickers HV, Brinell HB, Shore HS and Leeb HL. Thanks to its... -
Shore Hardness Gauge
Equipment necessary to measure the hardness feeling soft materials such as coatings, plastics and rubber.Equipped with a trailing pointer, giving the measurement results higher. The delivery includes a simple testblock. According to: DIN 53505, ISO 868 and ASTM D 2240. (FALTA INSERTAR VIDEO AQUI) Models... -
Impact Test Equipment
The Impact Test is used to determine the impact resistivity and flexibility of coatings. The dual scale instrument is equipped with a special guidance which assures that the distance between each impact is always according to the standard. For correct positioning a spirit-level is built-in. Each Impact test comes as a complete set (instrument and accessoires) to perform a test according... -
Pendulum Hardness Tester
The Pendulum Hardness Tester has a lot of unique features that ease defining hardness by the König and/or Persoz method as described in ISO 1522. Both methods work on the principle that the damping time of a pendulum oscillating on a sample indicates the hardness. The instrument has an easy menu-driven interface with jog dial. The automated electronic counting mechanism is not affected by...
Follow us