-
Tape For Adhesion Test (ISO 2409:2003)
The Tape For Adhesion Test (ISO 2409:2003) is used to perform a cross cut hatch adhesion test according to ISO 2409:2003 standard. To be used with Cross Cut Adhesion Test Kit CC1000, Cross Cut Adhesion Test Kit, Basic Inspektion Kit, Master Paint Plate, Adhesion Test Kit and SuperPIG, etc. Models available: Tape for Cross Cut Adhesion Test, 1 roll acc. EN ISO 2409:2003. Tape for... -
Cross Cut Adhesion Test Basic Cutter CC2000
The Cross Cut Adhesion Test Basic Cutter is used to test the adhesion of dry coats of paint on their substrate by means of a series of cuts through the coating. Two series of parallel cuts cross angled to each other to obtain a pattern of 25 or 100 similar squares. The ruled area is evaluated by using a table chart after a short treatment with a stiff brush, or adhesive tape for hard... -
Dolly Drill for Adhesion Test
The Dolly Drill is the perfect tool to remove the excess of glue and cut through the coating around dollies in order to prepare the dolly for the adhesion test. Fixed positioning is assured with the three strong magnets, allowing the drill to remove the coating around the dolly without putting any force on the dolly. Manually removing the access of glue and cutting through the coating is a hard...
Follow us