-
Chloride Ion Test Kit for Water
If the chloride levels in the wash water are too high, this will promote premature corrosion, shortening the life of both steel and concrete structures. Used to monitor recycled water (after it has been applied) to establish effectiveness of salt removal, this test is ideal when mixing concrete and when washing steel. Technical specifications: Measuremente range:10 -... -
ARP Soluble Salt Meter-Buy Lite Model Kit
ARP Soluble Salt Meter-Buy Lite Model Now available from OptimizaStore. The SSM was developed specifically to improve current methods of establishing surface cleanliness. This meter is the approved alternative for use as a replacement to the Bresle patch method equivalent to ISO Standard 8502-09. The Buy Lite Kit comes complete w/ Soluble Salt Meter, SSM adapter flat surface, dispenser, power... -
Conductivitymeter CM 41
With the conductivity meter CM 41 it is possible to measure conductivity value, the amount of all solid material or dissolved salts (TDS - Total Dissolved Solids) and temperature. Due to its small dimensions conductivity meter CM 41 is very easy to carry everywhere. The water resistant enclosure protects the device (it is also protected against dust). The measurement of EC and TDS... -
Conductivity -pHmeter PHD 1
The pH meter PHD 1 truly is a device with multiple capabilities for inspecting water quality. The portable pH meter PHD 1 is used for testing the pH value of water, conductivity and oxygen and is also very suitable to measure temperature. A three point calibration as well as an automatic temperature compensation guarantee a high level of accuracy even with variable temperature measurements. The... -
CSN Kit
Designed to accurately, measure surface chloride, sulphate and nitrate ions in minutes, the CSN Salt kit offers a single kit solution for testing in the field. All the components of the CSN Test Kits are pre-measured and pre-dosed for trouble free testing. Results are recorded in parts per million (ppm) requiring no complicated calculations. CSN tests are all designed to use a ratio of... -
SaltSmartTest
SaltSmart Meter SaltSmart Test Strip SaltSmartTM is a new technological breakthrough for the detection and analysis of surface soluble salts. The SaltSmart sensor is a disposible, one time use device with no possibility of cross-sample contamination. The SaltSmart meter records the date, time and surface salt concentration (up to 255 measurements) for easy download through a USB connection.... -
Bresle Kit 7310
The Bresle Kit complies with the ISO 8502-6 and ISO 8502-9 standards that describe the Bresle Method to assess the level of soluble salts using a Bresle patch or Bresle sampler, distilled water and a conductivity gauge. The conductivity is mainly directly proportional to the concentration of dissolved chloride ions in the solution. The kit includes all the necessary equipment to execute a... -
Salt contamination test kit Optimizastore
It is essential that the level of contaminants on a surface is measured prior to application of the coating to ensure the quality of the coating and that its optimum lifetime is achieved. If the coating is applied to a contaminated surface, which is not properly prepared, it could fail prematurely resulting in costly re-coating and high maintenance costs. ... -
Chloride Ion Test Kit for Abrasives
Chlorides deposited on a surface by contaminated abrasives during blasting can cause a coating to fail prematurely. Contamination can build up, particularly if the blast media is recycled several times. Using the Chloride Ion Test in the field will accurately identify contamination and prevent costly surface-related failures. Technical specifications: Measurement range: 1 -... -
Chloride Ion Test Kit for Surfaces
Chloride salts left on the surface before the first coat is applied can result in the coating system being forced off the surface by corrosion or blistering before the full life of the coating has been reached. To ensure that the chloride has been removed it is essential that the surface is tested before the coating is applied.The test method: a latex sleeve is filled with a Chlor*Rid extract... -
Conductivity Meter
Incorporating a flat sensor, the Conductivity Meter can measure the conductivity of a solution from a single drop of a sample. Users can either place a sample on the conductivity meter’s flat sensor or immerse the meter’s sensor directly into the solution under test. The Conductivity Meter can be used for a broad range of applications, including: soluble salt concentrations, the... -
Conductivity Meter waterproof Multi Range Tester.
The Conductivity Meter now measures a wider conductivity range from pure water to waste water and and comes with simultaneous temperature display, auto-ranging capabilities. Signature designs such as automatic temperature compensation and manual calibrations are retained, giving you accurate, reliable readings over a broad conductivity range every time you measure. Technical specifications:...
Follow us