Incorporating a flat sensor, the Conductivity Meter can measure the conductivity of a solution from a single drop of a sample.
Users can either place a sample on the conductivity meter’s flat sensor or immerse the meter’s sensor directly into the solution under test. The Conductivity Meter can be used for a broad range of applications, including: soluble salt concentrations, the electric conductivity (EC) of solutions used in agricultural operations and measuring rainwater pollution levels.
The Conductivity Meter includes a convenient salinity conversion indicator.
Features:
- Highly precise measurements can be obtained from a single drop.
- Automatic range switching gives a wide measurement range of 1μs/cm to 19.9mS/cm.
- Out of range and low battery alarms.
- Visual indication when ambient temperature is outside the operating range.
Technical specifications:
- Range: Conductivity: 0 mS/cm a 19.9 mS/cm, 0 S/m a 1.99 S/m.
Salts: 0% a 1.1%.
TDS: 0 ppm a 9900 ppm.
- Resolution: 0 μS/cm a 199 μS/cm: 1 μS/cm.
0.20 mS/cm a 1.99 mS/cm: 0.01 mS/cm.
2.0 mS/cm a 199 mS/cm: 0.1 mS/cm.
20 mS/cm a 199 mS/cm: 1 mS/cm.
- Accuracy: 0 μS/cm a 199 μS/cm: ± 5 μS/cm.
0.20 mS/cm a 1.99 mS/cm: ± 0.05 mS/cm.
2.0 mS/cm a 199 mS/cm: ± 0.5 mS/cm.
20 mS/cm a 199 mS/cm: ± 5 mS/cm.
Packing list: Conductivity-meter, 14ml (0.5fl oz) bottle of standard 1.41mS/cm calibration solution, 14ml (0.5fl oz) bottle of moistening solution, syringe, 2 x CR2032 lithium batteries and operating instructions
Follow us