The rotatable camera head of the VIS 300 / 350 Endoscope guarantees total insight to spots which are difficult to access. With its rotatable camera head, the VIS 300 / 350 Endoscope offers unimaginable options when it comes to the video analysis of narrow tubes, shafts and columns. The lens delivers very precise pictures of the detected cracks, broken welds or sels to the colour display. With a diameter of only 40 mm, the camera head of both models is so small that it is able to fit in almost everything. Moreover, it can be swiveled through 180 ° and even rotated through 360 °. This flexibility opens you completely new insights on damaged wastewater pipes, air pipes, intermediate ceilings or chimneys. In addition to that: The endoscope possesses very bright LEDs, is water-resistant and easy to use. Only one touch of a button makes sure that the device is ready for use. The pictures are then transferred to a colour display where weak points can be detected and evaluated. The integrated video output for the documentation of pictures is also available. Furthermore, the endoscope can either be battery-operated or supplied by mains. The endoscope comes in a hard case which includes camera, monitor and accessories. Another special feature of this endoscope lies in its "Home-Function". If you press the according button, the camera head of the endoscope adjusts automatically to its initial position. The endoscope can also be equiped very cost-efficiently with the Locator L, which makes it even easier to locate damaged spots. The Locator L is able to spot the camera head from above the ground by measuring the long radio waves which are sent from the camera head, while the endoscope produces both visual and acoustic signals. Those signals help the user to find the affected pipe section.
Features:
- Rotatable camera head Ø 40 mm
- 12 white LEDs
- Electronic meter count
- Home-Function
- 360 ° rotatable on its axis 180 ° swivelling
- Optional radiolocation of the camera head
- 7'' colour display
- VIS 350 Endoscope with SD memory card
(FALTA INSERTAR VIDEO AQUI)
Technical specifications:Display | |
Dimensions of the case | 176 x 114 x 32 mm |
Display | 7 '' / 16:9 format |
Output/Video Out | FBAS signal |
Video memory | SD card (only for the VIS 350) |
Weight | 400 g |
Power supply | 2 batteries, 12 V each or mains adaptor |
Operation time | each battery 120 min = 4 h |
Camera head Ø 40 mm | |
Miniature camera head | 1/3 " COLOUR CMOS |
Pixel | 768 x 576 (PAL), 656 x 492 (NTSC) |
Light sensitivity | 0.5 lux |
Lens | f = 2.3 mm, F = 2.5 |
Angle of image sensing | 115 ° |
Light source | 12 white LEDs |
Protection | IP 67 (water resistant) |
Dimensions | Ø 40 x 60 mm |
Operating temperature | 0 ... +40 °C, RH 95 % MAX |
Storage temperature | -20 ... +50 °C, RH 95 % MAX |
Locator transmitter | |
Transmit frequency | 8,9 kHz |
Push Rod | |
Length | 20 m |
Diameter | Ø 6,5 mm |
Hard Case | |
Dimensions | 510 x 430 x 170 mm |
Weight | 8,2 kg |
Digital length measurement | |
Resolution | 0,04 m |
Locator Receiver | |
Display | Graphic visualisation |
Output impedance | |
Headphones | Typ. 32 Ohm |
Power supply | 3,7 V Li Ion Akku |
Operating temperature | 0 ... +40 °C |
Storage temperature | -10 ... +40 °C |
Weight | 605 g |
Dimensions | 320 x 140 x 70 mm |
Storage (only VIS 350 Endoscope) | |
Recording | 2 GB SD memory card (2,5 h recording) |
Interface | Mini-USB |
Packing list: VIS 300 Endoscope in a hard case, rotatable camera head Ø 40 mm, wide-screen coloured monitor, 2 m connection cable, 20 m push rod Ø 6,5 mm, spare plastic dome, anit-slip mat, NiMH accumulator, in-car charger.
For model V350, clickHere.
Follow us