-
Optimiza Dust Test Kit
The Dust Tape Test kit allows assessment of the quantity and size of dust particles on surfaces prepared for painting. Dust on blast cleaned surfaces can reduce coating adhesion, leading to premature coating failure and sub-standard coating finish. Used in conjunction with the Dust Tape Roller the kit can be used in accordance with the recommendations of BS EN ISO 8502-3 either as a pass/fail... -
Spring Loaded Roller
The Spring Loaded Roller is used to perform objective dust tests according ISO 8502-3, and eliminates the human error by pressing with a constant force on the dust test tape. The ISO 8502-3 quantifies the quantity and size of dust particles on surfaces prepared for painting using a standarized tape for dust test. Dust on blast cleaned surfaces can reduce coating adhesion, leading to premature... -
UV inspection lantern
Robust, handheld rechargeable inspection spotlight with a power density at the hot spot of 10,000uW/cm2 and 1500uW/cm2 at 38cm (15") The UV inspection lantern is used to detect contaminations that react under UV-illumination and cannot be seen with naked eye such as some organic fats, alkaline contaminants etc.. Ideal to inspect the cleanliness of steel prior to painting.Delivered in a... -
UV pocket Flashlight
Small, light weight, UV pocket flashlight powered by an ultra-high output 390-410nm UV LED. This UV pocket flashlight is used to detect contaminations that react under UV-illumination and cannot be seen with naked eye such as some organic fats, alkaline contaminants etc.. Ideal to inspect the cleanliness of steel prior to painting. Packing list: UV flashlight, wrist trap, 3x AAA alkaline... -
Needle Pressure Gauge
The Needle Pressure Gauge is designed to measure air pressure in blast and air hoses. Pressure drop is responsible for decreased production rates, increased abrasive consumption and reduced surface profile in abrasive blasting systems. The measuring range is 0-160 psi. Packing list: Needle Pressure Gauge, pressure gauge guard, spare hypodermic needle, protective pouch and operating instructions. -
Blast Nozzle Gauge
Blast Nozzle Gauge measures the orifice size of an abrasive blasting nozzle. This gauge is used to determine the nozzle orifice wear which leads to low nozzle pressure and decreased efficiency in the performance of the nozzle's venturi. Nozzle orifice wear results in decreased productivity and increased abrasive media consumption. Technical specification: Measuring Range: 1/4 - 5/5”... -
Pipe Pit Gauge
The Pipe Pit Gauge is a pocket sized gauge designed to identify the condition of a pipe. The gauge is placed horizontally on the surface of the pipe and the stylus is positioned into the base of the corrosion pit. The gauge shows the pit depth compared to the nominal pipe wall thickness. Imperial units only. Technical specifications: Range: 0 - 500mils (0 - 0.5”). Graduation:... -
NACE Surface Finish Weld Replica
Based on NACE Standard RP0178, this 5.5" x11" visual comparator illustrates six degrees of surface finishing of lap welds and six degrees of surface finishing of butt welds. Two of the four corners on the comparator replicate a 1/8" and 1/4" radius for edge/corner grinding comparisons. A copy of the NACE standard is included with your purchase. Made in the USA. Packing... -
Soluble Sales Meter SST Positector
New meter for concentration of soluble salts or salt contamination in metals according to ISO 8502-6 / ISO 8502-9, also called Bresle test Equipment with probe specifically designed to measure conductivity according to ISO 8502-6.9. The duration of the test, the temperature of the sample, the conductivity (μS / cm) and the surface density (mg / m 2 or μg /...
Follow us