-
FMP10 y FMP20 DFT gauge
Standard hand-held device for nondestructive coating thickness measurement in all metals subtrates. Models availables:DELTASCOPE ® FMP10For measurement of non-ferrous metal coatings (chromium, copper, zinc, etc.) coatings of enamel, paint, varnish or plastic coating on steel and iron. (Measurement with magnetic induction method according to DIN EN ISO... -
SmartLink Positector
PosiTector SmartLink Wirelessly connect PosiTector probes to your smart device. A Smart New Way to Measure...PosiTector SmartLink and free mobile app turns your cell phone or tablet into a virtual PosiTector gage Intuitive easy-to-use touch screen operation Every reading is instantly transmitted to your smart device Tri-color LED provides immediate feedback in dark and noisy... -
Smartest
SmarTest is an intelligent wireless sensor for non-destructive coating thickness measurement and relays sensor data via Bluetooth to your tablet, smart phone or to the coating thickness gauge MiniTest 745. The radio sensor SmarTest is 16 mm / 0.63" in diameter and 125 mm / 4.92" in length somewhat like a thick ballpoint pen and weighs just 48 g / 1.7 oz. This means that you can... -
Software Data Center/FDD
DataCenter Software for Evaluating and Archiving Measurement Data. DataCenter IP Inspection Plan Software for Quality Assurance. The DataCenter Software significantly expands the functionality of the measuring instruments. Quickly and easily, measurement data can be transferred to the PC and inspection reports can be created and printed. In addition to the... -
NIST Calibration Standards
These traceable chrome plated steel test blocks are used to verify the accuracy of magnetic dry film thickness gages. Each set comes complete with a zero plate and multiple test blocks housed in a small vinyl binder and a Certificate of Traceability. Accuracy is +/- 5%; test blocks conform to ASTM D7091 and SSPC-PA2. Made in the USA. Models availables: Model SRM/1358 - 0.00-39... -
Coating thickness calibration standards 411
Plastic foils and plates. Certificates available upon request. Available in the range from 12 to 20.000 micron. These foils can be applied to all ferrous- or non-ferrous metal substrates. Models available: Coating thickness calibration standard, set of 5 Plastic Shims, Non-Certified: 25 µm (1 mil) Orange ± 20%, 50 µm (2 mil) Red ± 10%, 125 µm (5 mil) Blue... -
Coating Thickness Calibration Standard
Coated metal calibration standards consisting of a set of 4 calibration plates with epoxy coating on steel or aluminium. Model available: Coating Thickness Calibration Standard S1 FE, 0/75/250/1500 µm. Coating Thickness Calibration Standard S2 FE, 0/75/250/1000 µm. Coating Thickness Calibration Standard S3 FE, 0/15/ 40/ 100 µm. Coating Thickness Calibration... -
Ferrous zero test plate
Zero Test plates are for use in the laboratory, on the production line or on site.When used in conjunction with a set of foils, these test plates are ideal to test a coating thickness gauge’s functionality and calibration.In some cases, it may be difficult or impractical to obtain an uncoated substrate. For this reason Optimiza provides a range of Zero Test Plates. Packing... -
Paint Inspection Gauge Super PIG III
The SuperPIG III is a destructive precision tool for inspection and thickness measurement on single or multiple coats on virtually all substrates, including wood, plastics, metals etc. Also observes and measures substrate and film defects. Applies a small incision in the layer of paint, and uses an integrated microscope reticle.The equipment is a very stable instrument, also the integrated... -
Paint Inspection Gauge Tooke
Measure the thickness of individual coating layers (must be alternating or different colored layers) after the fact using the Tooke Gage. This powerful gage is hand-held and portable, and can be used over nearly any type of substrate. A "must have" for the coating failure investigator. The Tooke gage destructively reveals the thickness of each coat in a multiple coat system... -
Ultrasonic Material Thickness Gauge TG100
The material thickness gauge TG100 used to determine within seconds the thickness of metals, glass and homogeneous plastics . This easy to use device operates with ultrasounds , which gives high accuracy thickness measurement and wall materials . Each material requires different sound speeds . The appliance is factory preset with five different sound speeds for different...
Follow us